Wire Feed Module for Engine Driven Welders

An additional output control device designed to be easily installed into the previous generation of Classic® and Pipeliner® engine driven welders as well as the SA-250 Perkins or 350SA Perkins engine driven welders (with code 10061 and above). The Wire Feed Module modifies the dynamic output characteristics of the welder to provide excellent voltage control for semiautomatic wire electrode welding and other open arc processes. With the module installed, the welder can be easily set to operate in either the constant voltage or the standard constant current modes. The constant voltage mode is adjusted with the controls conveniently mounted on the control panel or with an optional remote control.

Features

• Easy access to the controls located on the welder control panel.
• Greatly enhanced welding arc performance with a wider range of wire electrodes and processes available.
• Improved arc starting characteristics and low spatter MIG welding with CO₂ gas.
• Built-in power contactor to provide a “cold” electrode when the gun trigger is released.
• Includes thermostatic protection to guard against overcurrent and overtemperature.
• Compatible machines:
  Classic I, Classic II, Classic III, Classic IIID Classic 300D / 300G
  Pipeliner 200D / 200G
  SA-250 SAE-300