Intended for use in structural and general fabrication, the updated Outershield® 71M mild steel flux-cored wire features a new AWS classification for mixed gas welding capability in addition to CO2 and meets the 20 ft/lbf (27 J) impact toughness AWS requirement at a lower than required test temperature of -40°F (-40°C). More...

New eco-friendly 5 lb. plastic tubes for stick electrodes are made from recycled plastic and are recyclable. These plastic tubes help protect electrode from breakage, are re-usable, feature a patent-pending design for easy stacking and large labels for easy identification. View Flyer (pdf)

For off-shore and other corrosive environments the SAE-500 Severe Duty™ (The "Silver Bullet") is the preferred choice with its great arc performance, design simplicity, reliability and ruggedness! Utilizing customer experience and input from job-site use, it is an upgraded version of the workhorse SAE-500 that you can count on! More...

The new Speed-Feed® Stem is 100% recyclable to reduce waste and environmental impact. At one metric ton (2,200 lb), customers can increase productivity with fewer changeovers and identify low wire levels with more visibility. The Speed-Feed® Stem is ideal for industrial manufacturing, like pipe mill applications. View flyer (pdf)

Innershield® NR®-233 is a good choice for training or novice welders while also meeting the mechanical property requirements listed in AWS D1.8. It is recommended for vertical up and overhead fillet and groove welds. For easy out-of-position operability and impact properties capable of exceeding 27 J (20 ft•lbf) at -29°C (-20°F) – choose Innershield® NR®-233. More...

Viking™ solar-powered auto-darkening helmets are fully loaded with features, built to demanding specs and packaged with a host of accessories. Features include: continuously variable control for shade, sensitivity and delay, light weight, magnifying ‘cheater’ lens capable, grind mode, and solar powered – no battery required!

All helmets come with great bonus items valued at over $25 including: sport-pak style helmet bag and Lincoln Electric® bandana. More...

A great choice for getting the job done! For construction contractors, maintenance crews, farmers or ranchers, the Ranger® 225 does a variety of basic welding jobs. And with 10,500 watts of peak AC generator power, it handles a variety of other jobs: lights, grinder, Lincoln Electric inverter, plasma cutter (separate air supply needed) or emergency power. At your service – everyday!™ More...

It’s great for service trucks, fence contractors, maintenance crews, farmers, ranchers and anyone who needs portable DC stick welding and AC generator power! Great features such as a Low-Lift™ grab bars (patent-pending), 1-1/4 in. (32 mm) diameter rugged tube frame, 6.8 gallon (25.7 liter) fuel tank and 4,750 watts surge (4,250 watts continuous) AC generator power. More...

The Bulldog™ 140 is great for homeowners and anyone who needs portable AC stick welding and AC generator power! Great features such as a Low-Lift™ grab bars (patent-pending), 1-1/4 in. (32 mm) diameter rugged tube frame, 6.8 gallon (25.7 liter) fuel tank and 5,500 watts surge (4,000 watts continuous) AC generator power. More...

The POWER MIG® 216 offers the autobody and sheet metal fabrication industries top welding performance with a host of professional features: Diamond Core Technology®, MAXTRAC® cast aluminum industrial wire drive, spool gun ready and NEW Coil Claw™ Cable Management system to keep your work station neat. More...

The multi-process Power Wave® S350 is packed with Lincoln performance technology on both the input and output side. It provides an extremely fast arc response, includes over 65 standard welding waveforms for optimized performance on almost any application and efficiently converts input power to reduce operational costs – all in a compact, rugged case. More...

Magnum® PRO guns for MIG and flux-cored welding are specifically designed and tested in extreme environment welding applications. These guns are built for high amperage, 100% duty cycle applications where heat-resistance and fast serviceability are key. More...

UltraCore® 70C gas-shielded flux-cored wire is designed for low fume generation rates and controlled H8 diffusible hydrogen levels. It is recommended for both single or multiple pass welding in either semi-automatic or automatic applications. For high deposition rates, excellent bead stacking and low fume levels – choose UltraCore® 70C. More...

Lincoln Electric’s DownFlex™ table is a dual purpose work bench and extraction unit, designed specifically for the removal of welding fume at the source. It can also be used to remove particulate and dust from metal grinding applications, as well as fume and particulate from light duty plasma arc cutting. More...

UltraCore® 75C gas-shielded flux-cored wire is capable of producing low diffusible hydrogen levels and high deposition rates. It is recommended for both single or multiple pass welding in either semi-automatic or automatic applications. The basic slag system allows for high resistance to cracking and the capability to exceed impact property requirements at -40°C (-40°F) – choose UltraCore® 75C. More...

Excalibur® 7018-A1 MR, 8018-B2 MR and 9018-B3 MR are low hydrogen stick electrodes designed for all-position welding of low alloy steels containing molybdenum and chromium. A smooth arc, excellent strike and re-strike capabilities, self-peeling slag and extremely low spatter levels make Excalibur® the industry’s premium brand of low hydrogen electrodes. For a low alloy, low hydrogen electrode with industry-leading arc performance and operability – choose Excalibur® 7018-A1 MR, 8018-B2 MR and 9018-B3 MR. More....