DETAILS
4043 is a great choice for the welding of heat-treatable base alloys and more specifically the 6XXX series alloys. It has a lower melting point and more fluidity than the 5XXX series filler alloys and is preferred by welders because of its favorable operating characteristics. ER4043 type wires may reduce crack sensitivity with the 6XXX series base alloys. 4043 is suitable for sustained elevated temperature service, i.e. above 65°C.
Features
- Use on many weldable cast and wrought aluminium alloys
- Generally recommended for welding 5052, any 6XXX series alloys and castings
- Alloy embossed on each rod for easy identification
Typical Applications
- 6XXX alloys, and most casting alloys
- Automotive components such as frame and drive shafts
- Bicycle frames
- Bicycle frames
Welding Positions
- All
Shielding Gas
- I1 : Inert gas Ar (100%), I3 : Argon/Helium Mixtures, Flow rate : 14-24 l/min (Argon)
Special Features
- Q2 Lot® Certificate - Certified Material Test Report showing actual wire composition
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.10 | ER4043 |
WIRE COMPOSITION
| Classification | %Be | %Cu | %Fe | %Mg | %Mn | %Si | %Ti | %Zn |
|---|---|---|---|---|---|---|---|---|
| ER4043 Requirement | 0.0003 max. | 0.30 max. | 0.8 max. | 0.05 max. | 0.05 max. | 4.5 - 6.0 | 0.20 max. | 0.10 max. |
| Typical Result | 0.0000 | 0.03 | 0.1 | 0.01 | 0.00 | 5.1 | 0.01 | 0.00 |