Engine Driven Welders view all

Ranger® 260MPX™ Welder/Generator Engine Drive (Kohler®)

K3458-1

Top Features

  • Compact Size
  • Low Decibel Rating
  • Easy-to-Use Digital User Interface
  • Clean AC Generator Power
  • You can rent this equipment from these Rental Equipment Companies

Processes

Stick, TIG, MIG, Flux-Cored

Output

Input

Input ModeInput Polarity
Fuel Type

MSRP: $4,899.00

Quantity:  
Buy Now
Where To Buy

Equipment Details

DO MORE WITH LESS
The Ranger® 260MPX™ engine driven welder/generator excels on the job. The unit’s industry-leading design makes it smaller, lighter and quieter than other machines in its class, while an intuitive user interface with advanced technology helps simplify operation and improve arc control. You can also count on a reliable source of clean generator power to run a variety of tools and sensitive equipment.
Check out the features below:

 

Industry-Leading Design
The Ranger 260MPX welder/generator is smaller and quieter compared to other machines in its class.

  • Up to 20% smaller - more space for additional tools
  • Up to 25% lighter - easy maneuverability around the jobsite
  • Up to 60% quieter - reduced noise level helps enhance safety and comfort

 

Innovative User-Interface + Advanced Technology

  • Easy-to-read digital screen with simple push-and-turn controls
  • Ready.Set.Weld® technology simplifies setup with recommended settings
  • The Chopper Technology® feature helps improve arc control
  • CrossLinc® remote technology allows for arc adjustments at the weld
  • Maintenance alerts keep you informed when service is needed

 

Clean Generator Power

  • 9.5kW of clean AC generator power accomodates a variety of tools and equipment
  • Operate sensitive electronics, like laptops, without concern - this unit delivers clean generator power with 5% Total Harmonic Distortion
  • Run generator power and weld at the same time, without interruption
Rated Output
  • 260A/26V/100%
Output Range
  • NON-IEC Rating:
  • Maximum Output:
  • 260A/26V/100%
  • IEC Rating:
  • DC Stick:
  • 231A/29.2V/100%
  • DC TIG:
  • 260A/20.4V/100%
  • DC Constant Voltage:
  • 253A/26.7V/100%
Generator Output
  • 10000 watts peak, 9500 watts continuous
Type of Engine
  • Kohler OHV Command CH730 Gasoline
HP and speed
  • 23.5@3600
Cylinders
  • 2
Dimensions (H x W x D) 26 in x 20 in x 36 in (660 mm x 508 mm x 914 mm)
Net Weight 446.00 (202.31 kg)

 

INNOVATIVE USER INTERFACE
An easy-to-use digital interface with simple push-and-turn controls, combined with technology designed for quick setup and improved arc control, enables you to get started in no time.

1. Amps
2. Fuel Gauge
3. Weld Mode
4. Home Button
5. Local/Remote Button
6. Output
7. Ready.Set.Weld. Parameters
8. Back Button
9. Help Button

 

 

1. Digital User Interface
2. Engine Choke Control
3. GFCI
4. 120/240 Volt AC Full KVA Receptacle
5. Output Studs
6. Front battery access for easy maintenance
7. Engine Start Switch
8. Scroll Knob
9. 240 Volt AC Receptacles
10. Ground Stud
11. 120 Volt AC Receptacles
12. Galvanized base to increase the life of the machine and help prevent rusting
13. Strain relief shackles for improved life on cables

 

 

14. 6pin connector for easy to connect remote control operations, or foot or hand amptrol
15. Circuit Breakers
16. 7 pin connector for the first in class direct connect spool gun

 

 

 

You can rent this equipment from these Rental Equipment Companies

You can download CAD files for this product.

CAD Files Banner

Category
Product Number
Product Name
General
Small Two-Wheel Road Trailer with Duo-Hitch
Plasma Cutter
Tomahawk® 1000 Plasma Cutter with Hand Torch
General
Kohler® Tune Up Kit (CH23S/CH730/ECH740)
Spool Gun
Magnum® PRO 250LX GT
General
Ballistic Nylon Cover
General
Factory Undercarriage
General
All-Terrain Undercarriage
General
Magnum PRO 250LX GT Cable Extension
General
Spark Arrestor Kit
General
Wireless Pedal for TIG Welding
General
CrossLinc® Remote
Stick
Accessory Kit - 400 Amp
Stick
Remote Output Control 6 Pin - 100 ft. (30.5 m)
TIG
Foot Amptrol™ - 25 ft. (7.6m) (6 pin)
TIG
Hand Amptrol™ Rotary Track Style 25 ft (7.6m) (6-Pin)
Product Number
Product Name
Activ8X ™ Wire Feeder
LN-25X (No Flowmeter, Tweco®)
LN-25X w/(with Flowmeter,Tweco®)
Product Number
Product Name
POWER MIG® 180C MIG Welder
POWER MIG® 210 MP® Multi-Process Welder
Square Wave® TIG 200 TIG Welder
POWER MIG® 140 MP® Multi-Process Welder