DETAILS
- Deep arc penetration
- Light slag with minimal arc interference
- Excellent vertical and overhead capability
Features
- Para uniones a tope
- Aceros con presencia moderada de contaminantes en la superficie.
- Soldadura de aceros galvanizados.
Disclaimers
Service Information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.1 | E6010 |
| ABS | AWS A5.1 | E6010 |
| CWB | CSA W48 | E4310 |
| LR | LR - Chapter 11 | 3M |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
|---|---|---|---|---|
| E6010 Requirement | 330 (48) min. | 410 (60) min. | 22 min. | 27 (20) min. |
| Typical Result, As-welded | 380-470 (56-68) | 460-560 (67-82) | 22-32 | 32-118 (23-87) |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|
| E6010 Requirement | 0.20 max. | 0.20 max. | 1.20 max. | 0.30 max. | 0.30 max. | 1.00 max. | 0.08 max. | ||
| Typical Result | 0.10-0.13 | 0.05 max. | 0.35-0.60 | 0.01 max. | 0.03 max. | 0.004-0.012 | 0.004-0.012 | 0.14-0.39 | 0.01 max. |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity⁽¹⁾ |
Current
Amps |
|---|---|---|
| 3/32 in (2.4 mm) | DC+ | 40-80 |
| 3/32 in (2.4 mm) | DC- | 50-85 |
| 1/8 in (3.2 mm) | DC+ | 70-130 |
| 1/8 in (3.2 mm) | DC- | 75-135 |
| 5/32 in (4.0 mm) | DC+ | 90-165 |
| 5/32 in (4.0 mm) | DC- | 100-175 |
| 3/16 in (4.8 mm) | DC+ | 140-225 |
| 3/16 in (4.8 mm) | DC- | – |
| 7/32 in (5.6 mm) | DC+ | 200-275 |
| 7/32 in (5.6 mm) | DC- | – |
| 1/4 in (6.4 mm) | DC+ | 220-325 |
| 1/4 in (6.4 mm) | DC- | – |
NOTES
| Note |
|---|
| ⁽¹⁾ Preferred polarity is listed first. |