DETALLES
Designed for high deposition, out-of-position welding for structural fabrication in seismic zones. Recommended for single or multiple pass welding of 4.8 mm (3/16 in) and heavier carbon steel.
Características
- Altas tasas de deposición para la soldadura en todas las posiciones
- Arco penetrante
- Sistema de escoria de solidificación rápida y fácil de eliminar
- Cumple con los requisitos de la norma AWS D1.8 apara soldaduras sísmicas
- Notas: Los datos de las pruebas del nuevo suplemento para soldadura sísmica del acero estructural AWS D1.8 pueden encontrarse en el Centro de Certificación de Lincoln Electric.
Información de mantenimiento
También puede necesitar
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Página de búsqueda de HDS
Ver resultado de la prueba Descargo de responsabilidad
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.20 | E71T-8-H16 |
AWS | AWS A5.36 | E71T8-A2-CS3-H16 |
ABS | ABS - Part 2 | 3YSA |
BV | BV - Chapter 5 | SA3YMH |
CWB | CSA W48 | E491T8-A3-CS3-H16 (E491T-8-H16) |
DNV-GL | DNV - 2.9 | III YMS H15 |
DB | ISO 17632-A | T 42 3 Y N 2 H15 |
LR | LR - Chapter 11 | 3YS H15 |
MIL | MIL-E-24403/1D | MIL-71T-8AS |
MECHANICAL PROPERTIES
Classification | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
---|---|---|---|---|---|
E71T-8-H16 Requirement | DC- | 400 (58) min. | 480-660 (70-95) | 22 min. | |
E71T8-A2-CS3-H16 Requirement | DC- | 400 (58) min. | 480-660 (70-95) | 22 min. | 27 (20) min. |
Typical Result, As-welded | DC- | 410 (60) | 560-630 (82-91) | 22 | 38-84 (28-62) |
DEPOSIT COMPOSITION
Classification | Polarity | %Al | %B | %C | %Mn | %P | %S | %Si |
Diffusible Hydrogen
mL/100g Weld Metal |
---|---|---|---|---|---|---|---|---|---|
E71T-8-H16 Requirement | DC- | 0.30 max. | 1.75 max. | 0.03 max. | 0.03 max. | 0.60 max. | 16.0 max. | ||
E71T8-A2-CS3-H16 Requirement | DC- | 0.30 max. | 1.75 max. | 0.030 max. | 0.030 max. | 0.60 max. | 16 max. | ||
Typical Result | DC- | 0.6-0.8 | 0.0012 | 0.13-0.21 | 0.60-0.72 | 0.013 | 0.010 | 0.24-0.34 | 8.5 |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Melt-off Rate
kg/hr (lb/hr) |
Deposition Rate
kg/hr (lb/hr) |
Efficiency
% |
---|---|---|---|---|---|---|---|---|
0.068 in (1.7 mm) | DC- | 19-32 (3/4-1 1/4) | 2.8 (110) | 18-19 | 195 | 2.3 (5.0) | 1.8 (3.9) | 78 |
0.068 in (1.7 mm) | DC- | 19-32 (3/4-1 1/4) | 3.3 (130) | 19-21 | 225 | 2.8 (6.2) | 2.0 (4.6) | 74 |
0.068 in (1.7 mm) | DC- | 19-32 (3/4-1 1/4) | 3.8 (150) | 19-21 | 250 | 3.2 (7.1) | 2.4 (5.3) | 75 |
0.068 in (1.7 mm) | DC- | 19-32 (3/4-1 1/4) | 4.3 (170) | 20-22 | 270 | 3.5 (7.8) | 2.8 (6.1) | 78 |
0.068 in (1.7 mm) | DC- | 19-32 (3/4-1 1/4) | 5.0 (195) | 23-24 | 300 | 4.3 (9.4) | 3.2 (7.0) | 74 |
0.068 in (1.7 mm) | DC- | 19-32 (3/4-1 1/4) | 6.4 (250) | 23-24 | 350 | 5.4 (11.8) | 4.0 (9.0) | 76 |
0.068 in (1.7 mm) | DC- | 19-32 (3/4-1 1/4) | 7.4 (320) | 25-27 | 400 | 6.9 (15.2) | 5.2 (11.4) | 75 |
0.072 in (1.8 mm) | DC- | 19-32 (3/4-1 1/4) | 2.0 (80) | 16-18 | 130 | 1.8 (4.0) | 1.5 (3.3) | 83 |
0.072 in (1.8 mm) | DC- | 19-32 (3/4-1 1/4) | 3.5 (140) | 18-21 | 225 | 3.1 (6.8) | 2.5 (5.5) | 81 |
0.072 in (1.8 mm) | DC- | 19-32 (3/4-1 1/4) | 3.9 (155) | 19-22 | 240 | 3.3 (7.2) | 2.7 (6.0) | 83 |
0.072 in (1.8 mm) | DC- | 19-32 (3/4-1 1/4) | 4.3 (170) | 20-23 | 255 | 3.6 (8.0) | 2.9 (6.5) | 81 |
0.072 in (1.8 mm) | DC- | 19-32 (3/4-1 1/4) | 6.4 (250) | 22-24 | 315 | 5.3 (11.7) | 4.3 (9.6) | 82 |
0.072 in (1.8 mm) | DC- | 19-32 (3/4-1 1/4) | 7.4 (290) | 23-25 | 350 | 6.2 (13.6) | 5.0 (11.0) | 81 |
5/64 in (2.0 mm) | DC- | 19-32 (3/4-1 1/4) | 1.5 (60) | 16-17 | 145 | 1.7 (3.7) | 1.2 (2.7) | 73 |
5/64 in (2.0 mm) | DC- | 19-32 (3/4-1 1/4) | 2.9 (115) | 19-20 | 260 | 3.2 (7.0) | 2.5 (5.5) | 78 |
5/64 in (2.0 mm) | DC- | 19-32 (3/4-1 1/4) | 3.0 (120) | 19-20 | 270 | 3.3 (7.3) | 2.6 (5.7) | 78 |
5/64 in (2.0 mm) | DC- | 19-32 (3/4-1 1/4) | 3.3 (130) | 20-21 | 285 | 3.5 (7.8) | 2.8 (6.2) | 79 |
5/64 in (2.0 mm) | DC- | 19-32 (3/4-1 1/4) | 4.6 (180) | 22-23 | 365 | 5.0 (10.9) | 3.9 (8.7) | 80 |