Detalles
LINCOLN® ER308Si/308LSi provides high silicon level for increased puddle fluidity and wetting out at the toes, solid rod with lower carbon for welding chromium-nickel steels.
Características
- High silicon level for increased puddle fluidity and wetting out at the toes
- Solid rod with lower carbon for welding Cr-Ni steels
- Used to primarily weld equipment made with 304 type stainless steel
- Ink jet printing identification on entire length of electrode
- Q2 Lot® Tested - A certificate showing actual wire composition and calculated ferrite number (FN) is available online
Aplicaciones Típicas
- 304 and 304L stainless steels
- Common austenitic stainless steels referred to as 18-8 steels
- ASTM A743, A744 Types CF-8 and CF-3
- General Fabrication
- Chemical Processing
Posiciones de soldadura
- All
Gas protector
- 100% Argon
Características especiales
- Petroleum Processing
Servicio de información
ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS
Ver los resultados de la prueba de limitación de responsabilidad
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.9 | ER308LSi, ER308Si |
WIRE COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %N | %Nb | %Ni | %P | %S | %Si | Ferrite Number (Delong ©) | Ferrite Number (WRC-1992 ©) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| ER308LSi Requirement | 0.03 max. | 19.5 - 22.0 | 0.75 max. | 1.0 - 2.5 | 0.75 max. | Info. Only | Info. Only | 9.0 - 11.0 | 0.03 max. | 0.03 max. | 0.65 - 1.00 | Info. Only | Info. Only |
| ER308Si Requirement | 0.08 max. | 19.5 - 22.0 | 0.75 max. | 1.0 - 2.5 | 0.75 max. | Info. Only | Info. Only | 9.0 - 11.0 | 0.03 max. | 0.03 max. | 0.65 - 1.00 | Info. Only | Info. Only |
| Typical Result | 0.03 | 20.0 | 0.06 | 2.0 | 0.05 | 0.06 | 0.00 max. | 9.6 | 0.02 | 0.02 | 0.82 | 12 | 10 |