Menu Close
Excalibur 7018 MR 14 stick electrode"

Diameters / Packaging

Diameters
 50 lb Easy Open Can
3/16 x 18 in (4.8 x 450 mm) ED032790
5/32 x 14 in (4.0 x 350 mm) ED032636

Excalibur® 7028

Stick (SMAW)

AWS:
E7028 H8

Mild Steel, Low Hydrogen • AWS E7028 H8

Diamètre

Sélectionnez le diamètre

  • 3/16 x 18 in (4.8 x 450 mm)
  • 5/32 x 14 in (4.0 x 350 mm)

Paquet

Sélectionnez un forfait

  • 50 lb Easy Open Can
Acheter maintenant

Détails

Traits

  • High deposition rates
  • Premium arc performance
  • High travel speed
  • Capable of producing weld deposits with impact toughness exceeding 84 J (60 ft.lbf) at -40°C (-40°F)

Applications typiques

  • Bridge fabrication
  • Storage tanks
  • Heavy fabrication
  • Shipbuilding
  • Structural

Positions de soudage

  • Flat/Horizontal

Gaz de protection

  • Not Applicable

Caractéristiques spéciales

  • Available to meet Buy America. Choose a Buy America MTS product from the list of Available Types or contact a Lincoln Electric representative

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Des informations de service

Vous pourriez également avoir besoin

Stick Electrode 50 lb. Box

JETWELD® 1

ED010366
Stick Electrode 50 lb. Box

Jetweld® 1 Stick (SMAW) Electrode

ED010375
50 lb Can of Lincoln Electric Stick Electrodes

Excalibur® 7028 Stick (SMAW) Electrode

ED032790
K2394-1-Stick Electrode Holder & Cable Assembly Kit

Stick Electrode Holder and Cable Assembly (Twist Mate™)

K2394-1
Voir tout

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.1 E7028-H8
ABS ABS - Part 2 3YH10
CWB CSA W48 E4928-H8
DNV-GL DNV - 2.9 3YH10
LR LR - Chapter 11 3YM H10

MECHANICAL PROPERTIES

Classification Yield Strength @ 0.2% Offset
MPa (ksi) 		Tensile Strength
MPa (ksi) 		Elongation
% 		Charpy V-Notch
J (ft-lbs) @ -20°C (0°F) 		Hardness Rockwell B
E7028-H8 Requirement 400 (58) min. 480 (70) min. 22 min. 27 (20) min.
Typical Result, As-welded 430-490 (63-71) 530-580 (77-84) 28-32 104-422 (77-311) 85-90

DEPOSIT COMPOSITION

Classification %C %Cr %Mn %Mo %Ni %P %S %Si %V %Mn+Ni+Cr+Mo+V Diffusible Hydrogen
mL/100g Weld Metal 		1800F H2O - As received
E7028-H8 Requirement 0.15 max. 0.20 max. 1.60 max. 0.30 max. 0.30 max. 0.035 max. 0.035 max. 0.90 max. 0.08 max. 1.75 max. 8 max. 0.6 max.
Typical Result 0.04-0.08 0.03-0.07 1.11-1.50 0.03 max. 0.01-0.07 0.009-0.015 0.004-0.012 0.35-0.65 0.01-0.02 1.22-1.58 2-8 0.2 max.

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
5/32 in (4.0 mm) DC+ 125-175
5/32 in (4.0 mm) AC 130-180
3/16 in (4.8 mm) DC+ 185-245
3/16 in (4.8 mm) AC 190-250
7/32 in (5.6 mm) DC+ 220-280
7/32 in (5.6 mm) AC 250-310

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.