Détails
Designed to handle poor fit-up on heavy wall tubes and gaps up to 9.5 mm (3/8 in) with 6.4 mm (1/4 in) offset. Recommended for all position welding on unlimited plate thicknesses.
Traits
- Designed to handle poor fit-up on heavy wall tubes and gaps up to 9.5 mm (3/8 in) with 6.4 mm (1/4 in) offset
- Fast freezing slag with excellent wash-in
- Root bead capability without back-up bars
Applications typiques
- General plate fabrication, including bridge fabrication, hull plate and stiffener welding on ships and barges
- Storage tanks
- Structural welding
- Offshore welding in TKY joints
Positions de soudage
- All
Gaz de protection
- N/A
Disclaimers
Des informations de service
Vous pourriez également avoir besoin
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.20 | E71T-8-JH8 |
| AWS | AWS A5.36 | E71T8-A4-CS3-H8 |
| ABS | ABS - Part 2 | 3YSA H15 |
| BV | BV - Chapter 5 | SA3YMH |
| CWB | CSA W48 | E491T8-A4-CS3-H8 (E491T-8-JH8) |
| DNV-GL | DNV - 2.9 | III YMS H10 |
| LR | LR - Chapter 11 | 3YS H15 |
MECHANICAL PROPERTIES
| Classification | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch
J (ft-lbs) @ -40°C (-40°F) |
|---|---|---|---|---|---|---|
| E71T-8-JH8 Requirement | DC- | 400 (58) min. | 480-660 (70-95) | 22 min. | 27 (20) min. | |
| E71T8-A4-CS3-H8 Requirement | DC- | 400 (58) min. | 480-660 (70-95) | 22 min. | 27 (20) min. | |
| Typical Result, As-welded | DC- | 400 (58) | 500-570 (72-82) | 26 | 96-354 (71-261) | 35-398 (26-294) |
DEPOSIT COMPOSITION
| Classification | Polarity | %Al | %C | %Mn | %P | %S | %Si |
Diffusible Hydrogen
mL/100g Weld Metal |
|---|---|---|---|---|---|---|---|---|
| E71T-8-JH8 Requirement | DC- | 0.30 max. | 1.75 max. | 0.03 max. | 0.03 max. | 0.60 max. | 8.0 max. | |
| E71T8-A4-CS3-H8 Requirement | DC- | 0.30 max. | 1.75 max. | 0.030 max. | 0.030 max. | 0.60 max. | 8 max. | |
| Typical Result | DC- | 0.7-1.1 | 0.05-0.07 | 1.25-1.56 | 0.012 | 0.004 | 0.20-0.28 | 5.3 |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
CTWD
mm (in.) |
Wire Feed Speed
m/min (in/min) |
Voltage
volts |
Approx. Current
amps |
Melt-off Rate
kg/hr (lb/hr) |
Deposition Rate
kg/hr (lb/hr) |
Efficiency
% |
|---|---|---|---|---|---|---|---|---|
| 0.068 in (1.7 mm) | DC- | 25 (1) | 1.8 (70) | 16-17 | 145 | 1.5 (3.3) | 1.0 (2.3) | 69 |
| 0.068 in (1.7 mm) | DC- | 25 (1) | 2.3 (90) | 18-19 | 180 | 1.9 (4.2) | 1.5 (3.2) | 76 |
| 0.068 in (1.7 mm) | DC- | 25 (1) | 3.0 (120) | 20-21 | 225 | 2.5 (5.6) | 2.0 (4.3) | 76 |
| 0.068 in (1.7 mm) | DC- | 25 (1) | 3.5 (140) | 21-22 | 255 | 2.9 (6.4) | 2.2 (4.8) | 75 |
| 0.068 in (1.7 mm) | DC- | 25 (1) | 3.8 (150) | 23-24 | 265 | 3.1 (6.8) | 2.3 (5.1) | 75 |
| 5/64 in (2.0 mm) | DC- | 25 (1) | 1.3 (50) | 16-17 | 130 | 1.4 (3.1) | 0.9 (1.9) | 61 |
| 5/64 in (2.0 mm) | DC- | 25 (1) | 1.8 (70) | 18-19 | 180 | 2.0 (4.3) | 1.3 (2.9) | 67 |
| 5/64 in (2.0 mm) | DC- | 25 (1) | 2.3 (90) | 19-20 | 220 | 2.5 (5.6) | 1.9 (4.2) | 75 |
| 5/64 in (2.0 mm) | DC- | 25 (1) | 2.8 (110) | 20-21 | 260 | 3.1 (6.8) | 2.4 (5.3) | 77 |
| 5/64 in (2.0 mm) | DC- | 25 (1) | 3.0 (120) | 21-22 | 280 | 3.4 (7.4) | 2.7 (5.9) | 79 |
| 5/64 in (2.0 mm) | DC- | 25 (1) | 3.5 (140) | 22-23 | 310 | 3.9 (8.7) | 3.1 (6.8) | 79 |