Diamètres / Emballages
|
Diamètres |
(3) 10 lb Tube |
|---|---|
| 2,4 mm (3/32 in) | ED034899 |
DÉTAILS
Suitable for use where consumables with less than 1% Ni are required.
Caractéristiques
- Capable of producing welds with 690 MPa (100 ksi) tensile strength
- Suitable for use where consumables with less than 1% Ni are required
- Batch Managed Inventory
Exemples d'applications
- NACE applications
- Oil tools
- Riser systems
- High-strength pipe
Positions de soudage
- All
Gaz de protection
- 100% Argon
Service d'information
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. Page de recherche SDS
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.28 | ER100S-G |
MECHANICAL PROPERTIES
| Classification | Shielding Gas | Polarity |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -50°C (-60°F) |
|---|---|---|---|---|---|---|
| ER100S-G Requirement | 100% Ar | DC- | 690 (100) min. | |||
| Typical Result, As-welded | 100% Ar | DC- | 630 (91) | 750-870 (109-126) | 29 | 177-261 (130-192) |
WIRE COMPOSITION
| Classification | %Al | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %Ti | %V | %Zr | %Total Cu |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Typical Result | 0.00 max. | 0.09-0.12 | 0.27 | 1.50-1.54 | 0.45 | 0.92 | 0.007-0.009 | 0.001-0.004 | 0.58-0.62 | 0.00 max. | 0.005 max. | 0.001 max. | 0.16-0.20 |