DETAILS
Features
- Deep arc penetration
- Light slag with minimal arc interference
- Excellent vertical and overhead capability
Typical Applications
- Cross country and in-plant pipe welding
- Steel with moderate surface contaminants
- Square edge butt welds
- Welding on galvanized and specially coated steels
Welding Positions
- All
Shielding Gas
- Not Applicable
Service Information
You May Also Need
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page
See test result disclaimer
CONFORMANCE
CONFORMANCES | SPECIFICATION | CLASSIFICATION |
---|---|---|
AWS | AWS A5.1 | E6010 |
ABS | AWS A5.1 | E6010 |
CWB | CSA W48 | E4310 |
LR | LR - Chapter 11 | 3M |
MECHANICAL PROPERTIES
Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
---|---|---|---|---|
E6010 Requirement | 330 (48) min. | 410 (60) min. | 22 min. | 27 (20) min. |
Typical Result, As-welded | 380-470 (56-68) | 460-560 (67-82) | 22-32 | 32-118 (23-87) |
DEPOSIT COMPOSITION
Classification | %C | %Cr | %Mn | %Mo | %Ni | %P | %S | %Si | %V |
---|---|---|---|---|---|---|---|---|---|
E6010 Requirement | 0.20 max. | 0.20 max. | 1.20 max. | 0.30 max. | 0.30 max. | 1.00 max. | 0.08 max. | ||
Typical Result | 0.10-0.13 | 0.05 max. | 0.35-0.60 | 0.01 max. | 0.03 max. | 0.004-0.012 | 0.004-0.012 | 0.14-0.39 | 0.01 max. |
TYPICAL OPERATING PROCEDURES
Diameter | Polarity⁽¹⁾ |
Current
Amps |
---|---|---|
3/32 in (2.4 mm) | DC+ | 40-80 |
3/32 in (2.4 mm) | DC- | 50-85 |
1/8 in (3.2 mm) | DC+ | 70-130 |
1/8 in (3.2 mm) | DC- | 75-135 |
5/32 in (4.0 mm) | DC+ | 90-165 |
5/32 in (4.0 mm) | DC- | 100-175 |
3/16 in (4.8 mm) | DC+ | 140-225 |
3/16 in (4.8 mm) | DC- | – |
7/32 in (5.6 mm) | DC+ | 200-275 |
7/32 in (5.6 mm) | DC- | – |
1/4 in (6.4 mm) | DC+ | 220-325 |
1/4 in (6.4 mm) | DC- | – |
NOTES
Note |
---|
⁽¹⁾ Preferred polarity is listed first. |