Blue Max Stainless Wire

Diameters / Packaging

Diameters
33 lb (15 kg) Steel Spool
0.035 in (0.9 mm) ED035150
0.045 in (1.1 mm) ED035151
1/16 in (1.6 mm) ED035153

Blue Max® 630 MIG (GMAW) Wire

MIG (GMAW) | ED035153

CLASSIFICATIONS:
AWS A5.9 : ER630

BLUE MAX® MIG 630 is a precipitation hardening, martensitic stainless steel alloy designed for welding 17-4 PH and 15-5 stainless steels

DETAILS

BLUE MAX® MIG 630 ideal for welding precipitation hardened stainless steels, heat treatment of material will obtain higher strength and greatly influence mechanical properties

Features

  • Q2 Lot® - Certified Material Test Report showing actual wire composition and Country of Origin of each lot is available online in the Certificate Center
  • Proprietary surface lubricant for steady feeding and arc stability leading to exceptional performance at high wire feed speeds
  • Heat treatment of material will obtain higher strength, and greatly influence mechanical properties
  • Precipitation hardening, martensitic stainless steel

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.9 ER630
CWB CSA W48 ER630

WIRE COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %N %Nb %Ni %P %S %Si Ferrite Number (Delong ©) Ferrite Number (WRC-1992 ©)
ER630 Requirement 0.05 max. 16.00 - 16.75 3.25 - 4.00 0.25 - 0.75 0.75 max. 0.15 - 0.30 4.5 - 5.0 0.03 max. 0.03 max. 0.75 max.
Typical Result 0.02-0.03 16.48-16.60 3.43-3.60 0.57-0.58 0.09-0.14 0.02-0.04 0.22-0.25 4.6-4.7 0.02 0.003 max. 0.44-0.46 20 19

TYPICAL OPERATING PROCEDURES

Diameter Shielding Gas Voltage
volts
Approx. Current
amps
0.035 in (0.9 mm) 98% Ar / 2% CO2 26-29 160-210
0.045 in (1.1 mm) 98% Ar / 2% CO2 28-32 180-250
1/16" (1.6 mm) 98% Ar, 2% CO2 29-33 200-280