Menu Close
Excalibur 7018-A1 MR

Diameters / Packaging

Diameters
 10 lb (4.5 kg) Easy Open Can
1/8 x 14 in (3.2 x 355 mm) ED035015
3/16 x 14 in (4.8 x 355 mm) ED035018
5/32 x 14 in (4.0 x 355 mm) ED035016

Excalibur® 410NiMo-16 Stick (SMAW) Electrode

Stick (SMAW) | ED035018

CLASSIFICATIONS:
AWS A5.4 : E410NiMo-16

EXCALIBUR® 410NIMO-16 is designed for welding CA6NM Stainless Steel can be used to overlay mild and low alloy steels. Typical application on Turbines, Valve Bodies, High Pressure Piping, Offshore and Power Generation in all welding positions, except vertical down (Stainless)

Diameter

Select Diameter

  • 1/8 x 14 in (3.2 x 355 mm)
  • 3/16 x 14 in (4.8 x 355 mm)
  • 5/32 x 14 in (4.0 x 355 mm)

Package

Select Package

  • 10 lb (4.5 kg) Easy Open Can
Buy Now

DETAILS

EXCALIBUR® 410NIMO-16 ideally used to overlay mild and low alloy steels, recommended preheat and inter-pass temperatures greater than 300°F (150°C).

Features

  • This electrode can be used to overlay mild and low alloy steels
  • Preheat and inter-pass temperatures greater than 300°F (150°C) are recommended during welding
  • Post-weld heat treatment should not exceed 1150°F (620°C) as higher temperatures may result in hardening

Disclaimers

Warning -

Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Service Information

BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Search page

See test result disclaimer

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.4 E410NiMo-16

MECHANICAL PROPERTIES

Classification Tensile Strength
MPa (ksi) 		Elongation
%
E410NiMo-16 Requirement 760 (110) min. 15 min.
Typical Result, 1 hour @ 605°C (1125°F) 940-980 (136-142) 18-20

DEPOSIT COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %Ni %P %S %Si
E410NiMo-16 Requirement 0.06 max. 11.0 - 12.5 0.75 max. 1.0 max. 0.40 - 0.70 4.0 - 5.0 0.04 max. 0.03 max. 0.90 max.
Typical Result 0.04 11.4-11.8 0.07 0.5 0.61-0.65 4.6-4.7 0.03 0.01 0.19-0.25

TYPICAL OPERATING PROCEDURES

Diameter Polarity⁽¹⁾ Current
Amps
3/32 in (2.4 mm) DC+ 40-80
3/32 in (2.4 mm) AC 40-80
1/8 in (3.2 mm) DC+ 75-110
1/8 in (3.2 mm) AC 75-110
5/32 in (4.0 mm) DC+ 95-150
5/32 in (4.0 mm) AC 95-150
3/16 in (4.8 mm) DC+ 130-200
3/16 in (4.8 mm) AC 130-200

NOTES

Note
⁽¹⁾ Preferred polarity is listed first.