Menu Cerrar
Lincoln Stainless Cut Length TIG Electrode

Diámetros / Embalaje

Diámetros
mm 		10 lb (4.5 kg) Plastic Tube
1/8 in (3.2 mm) ED034929
1/16 in (1.6 mm) ED034927
3/32 in (2.4 mm) ED034928

Lincoln® ER316/316LCF

Soldadura de Arco Eléctrico con Tungsteno y Gas (GTAW) | ED034929

CLASIFICACIONES:
ER316
ER316L

Lincoln ER316/316LCF Bajo contenido de ferrita (rango de 3 a 5).

Diámetro

Seleccionar diámetro

  • 1/8 in (3.2 mm)
  • 1/16 in (1.6 mm)
  • 3/32 in (2.4 mm)

Paquete

Desencadenar

  • 10 lb (4.5 kg) Plastic Tube

Detalles

LINCOLN® ER316/316LCF provides controlled low ferrite (FN 3-6), Charpy V-Notch test results capable of exceeding 27 J (20 ft•lbf) @ -196°C (-320°F) and Exceeds 15 mils (0.38 mm) of lateral expansion @ -196°C (-320°F).

Características

  • Controlled Low Ferrite (Range 3-6)
  • Charpy V-Notch test results capable of exceeding 27 J (20 ft•lbf) @ -196°C (-320°F)
  • Exceeds 15 mils (0.38 mm) of lateral expansion at -196°C (-320°F)
  • Batch Managed Inventory
  • Ink jet printing identification on entire length of electrode
  • Q2 Lot® - Certificates showing actual wire composition, ferrite number, and impact properties tested at -196°C (-320°F) available online

Servicio de información

ANTES DE USARLO, LEA Y COMPRENDA LA HOJA DE DATOS DE SEGURIDAD (SDS) DE ESTE PRODUCTO Y LA INFORMACIÓN ESPECÍFICA IMPRESA EN EL ENVASE DEL PRODUCTO. Página de Búsqueda SDS

Ver los resultados de la prueba de limitación de responsabilidad

CONFORMANCE

CONFORMANCES SPECIFICATION CLASSIFICATION
AWS AWS A5.9 ER316, ER316L

MECHANICAL PROPERTIES

Classification Shielding Gas Elongation
% 		Tensile Strength
MPa (ksi) 		Yield Strength @ 0.2% Offset
MPa (ksi) 		Charpy V-Notch
J (ft-lbs) @ -196°C (-320°F) 		Lateral Expansion
mil @ -196 °C (-320 °F)
Typical Result 100% Ar 37 600 (87) 450 (65) 50-115 (37-85) 30-54

WIRE COMPOSITION

Classification %C %Cr %Cu %Mn %Mo %N %Nb %Ni %P %S %Si Ferrite Number (Delong ©) Ferrite Number (WRC-1992 ©)
ER316 Requirement 0.08 max. 18.0 - 20.0 0.75 max. 1.0 - 2.5 2.0 - 3.0 Info. Only Info. Only 11.0 - 14.0 0.03 max. 0.03 max. 0.30 - 0.65 Info. Only Info. Only
ER316L Requirement 0.03 max. 18.0 - 20.0 0.75 max. 1.0 - 2.5 2.0 - 3.0 Info. Only Info. Only 11.0 - 14.0 0.03 max. 0.03 max. 0.30 - 0.65 Info. Only Info. Only
Typical Result 0.01-0.02 18.3-18.5 0.08-0.18 1.7-1.8 2.5-2.6 0.06 0.01 max. 12.3-13.2 0.02 0.01-0.02 0.34-0.47 4-7 4-5