DETAYLAR
Üstün kaynak havuzu kontrolü ve görünürlük için Pipeliner® Arc 80’e geçmenizi öneririz
Özellikleri
- Minimum ark girdisi için ince cüruf
- Derin nüfuziyet
- Temiz, belirgin kaynak havuzu
- Üstün kaynak havuzu kontrolü
Servis Bilgileri
Ayrıca İhtiyacınız Olabilir
BEFORE USE, READ AND UNDERSTAND THE SAFETY DATA SHEET (SDS) FOR THIS PRODUCT AND SPECIFIC INFORMATION PRINTED ON THE PRODUCT CONTAINER. SDS Arama sayfası
Test sonucunu görün sorumluluk reddi
CONFORMANCE
| CONFORMANCES | SPECIFICATION | CLASSIFICATION |
|---|---|---|
| AWS | AWS A5.5 | E8010-G, E8010-P1 |
| ISO | ISO 2560-A | E 46 4 1NiMo C 2 5 |
| ABS | AWS A5.5 | E8010-G |
| CWB | CSA W48 | E5510-G |
MECHANICAL PROPERTIES
| Classification |
Yield Strength @ 0.2% Offset
MPa (ksi) |
Tensile Strength
MPa (ksi) |
Elongation
% |
Charpy V-Notch
J (ft-lbs) @ -30°C (-20°F) |
Charpy V-Notch
J (ft-lbs) @ -45°C (-50°F) |
Hardness Rockwell B |
|---|---|---|---|---|---|---|
| E8010-G Requirement | 460 (67) min. | 550 (80) min. | 19 min. | |||
| Typical Result, As-welded | 470-570 (68-83) | 570-660 (83-96) | 20-26 | 57-89 (42-66) | 32-68 (24-50) | 87-95 |
DEPOSIT COMPOSITION
| Classification | %C | %Cr | %Cu | %Mn | %Mo | %Nb | %Ni | %P | %S | %Si | %V |
|---|---|---|---|---|---|---|---|---|---|---|---|
| E8010-G Requirement | 0.30 min. * | 1.00 min. * | 0.20 min. * | 0.50 min. * | 0.03 max. | 0.03 max. | 0.80 min. * | 0.10 min. * | |||
| Typical Result | 0.13-0.17 | 0.13 max. | 0.06 max. | 0.55-0.95 | 0.10-0.42 | 0.010 max. | 0.63-0.81 | 0.01-0.02 | 0.01 max. | 0.06-0.16 | 0.005 max. |
TYPICAL OPERATING PROCEDURES
| Diameter | Polarity |
Current
Amps |
|---|---|---|
| 1/8 in (3.2 mm) | DC+ | 75-130 |
| 5/32 in (4.0 mm) | DC+ | 90-185 |
| 3/16 in (4.8 mm) | DC+ | 140-225 |
NOTES
| Note |
|---|
| * To meet the requirements of a "G" classification, the chemical composition of the weld deposit must meet the minimum requirement for one or more of these elements. |